Hook the drain hose over the lip of the standpipe or lip of the laundry sink. If connecting to a standpipe, dont seal the hose to the pipe. Plumbing codes require that an air gap be left between the drain hose and standpipe to prevent siphoning water out of the washer. Dont lay the hose on the floor.
Where do I run my washing machine drain?
The drain pump may be located behind removable panels in either the front or back of the washing machine, even underneath the appliance, requiring you to tip the machine forward to access it (consult your owners manual for instructions). Youll see a drain hose and inlet hose connected to it with spring clamps.
How do you hook up a washing machine drain?
0:083:21Connecting the Drain Hose and Inlet Hoses to your Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou squeeze the clamp with pliers. And slide the elbow end of the drain hose onto the drain port onMoreYou squeeze the clamp with pliers. And slide the elbow end of the drain hose onto the drain port on the back of the washer.
Do you need a trap on a washer drain?
When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
How do you divert greywater from a washing machine?
The washing machines internal pump slightly pressurizes the greywater, so this system can irrigate plants across a flat yard. The washer hose is connected to a 3-way valve that can divert greywater either to the sewer or the greywater system and piped outside with 1” rigid pipe, like PVC.
How high does a washer drain need to be?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30 up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24 up from the floor and less than 8 feet high.
Can you hook up a full size washer to a sink?
You can connect your washing machine to your kitchen sink. A permanently installed washing machine should have its own drain and water supply, but if needed, you can make use of your kitchen sink drain and faucet as a temporary measure for a portable unit.
Do shower drains have S bends?
The trap in the shower drain works like the one beneath the kitchen sink. The S-shape allows water to drain vertically upon clearing through the S-shaped curve rather than draining horizontally. The bottom area of the shower trap holds some water that seals the drain against sewer gases.
Is washing machine water good for plants?
Household wastewater from washing machines, bathroom sinks, showers, and bathtubs is considered “gray” because it is only lightly soiled and poses a minimal health risk. As long as youre only putting biodegradable products down the drain, graywater is perfectly safe for irrigating plants.
Where should greywater not be used?
When handled properly, greywater can be safely reused for the garden. Never re-use water from toilets, washing nappies or kitchen water. Do not use greywater on vegetables, fruit, herbs or anything you plan to eat.
How far can you run a washer drain hose?
Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).
Can a washing machine drain upwards?
In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24 up from the floor and less than 8 feet high. GE and Hotpoint Top Load, Front Load and Unitized washers have powerful drain pumps that can pump water vertically as high as 8 feet above the floor.